Pro-Multi-Grill 3 in 1 V2
Use the temperature regulator (7) to
set the desired temperature depend-
ing on the food (see section tempera-
ture regulator; page 22).
Allow the appliance to heat up after
switching on. The operating tempera-
ture is reached in approx. 8 minutes
when the lid (2) is closed.
When the standby indicator (4) lights
up, the preset temperature has been
reached and grilling can start.
NOTE!
►
The temperature settings can be
changed at any time during grilling.
Using as a contact grill or sandwich
toaster
Switch on the appliance as described
in the section Operating the appli-
ance: Switching on (page 25).
Open the lid (2).
Put the food onto the lower grill plate
(15).
Close down the lid (2).
Grill the food until it is browned or
cooked as desired.
26
Using as an open grill
Fold up the lid (2) completely as de-
scribed in the section Folding up the
lid (page 24).
Switch on the appliance as described
in the section Operating the appli-
ance: Switching on (page 25).
Put the food onto both grill plates.
Grill the food until it is browned or
cooked as desired.
NOTE!
►
Regularly turn over food to ensure
even cooking; if possible, only turn
over fish and meat once to avoid
drying it out.
Using the spacer
Set the desired gap as described in
the section Setting the gap (page
24).
Switch on the appliance as described
in the section Operating the appli-
ance: Switching on (page 25).
Open the lid (2).
Put the food onto the lower grill plate
(15).
Close down the lid (2).
Grill the food until it is browned or
cooked as desired.
Switching off
Push the temperature regulator (7) to
" ".
Move the ON/OFF switch (5) to the
"O" position. The power indicator (6)
and the standby indicator (4) go out.
Allow the appliance to cool down com-
pletely.
BEEM - Elements of Lifestyle
EN