LaserLiner SensoLite 410 Manual De Instrucciones página 10

Versus function – reference height monitoring
False measurements can be avoided with this function. The receiver now
shows when the laser beam moves out of the reference height, e.g. because
of external influences acting on the rotary laser. To activate the function,
press the Plus/Minus buttons simultaneously and secure the device to the level
of the laser beam. "VER" appears in the LC display. The function is active
when the green LED lights for min. 10 seconds and the continuous tone
can be heard. The function is active as soon as the green LED flashes and
the continuous tone is muted. When the height of the laser beam changes,
a beeping sound can be heard and the green LED stops flashing.
VER
Universal mount
The laser receiver can be installed on levelling staffs
with the aid of the universal mount. The Flexi measuring
staff (Order number 080.50 - red / 080.51 - green)
is always recommended when measuring from floor
heights. It also allows you to determine heights
directly without any need for calculation.
Danger - powerful magnetic fields
Powerful magnetic fields can adversely affect persons with active medical
implants (e.g. pacemaker) as well as electromechanical devices
(e.g. magnetic cards, mechanical clocks, precision mechanics, hard disks).
With regard to the effect of powerful magnetic fields on persons, the
applicable national stipulations and regulations must be complied with
such as BGV B11 §14 „electromagnetic fields" (occupational health
and safety - electromagnetic fields) in the Federal Republic of Germany.
To avoid interference/disruption, always keep the implant or device a safe
distance of at least 30 cm away from the magnet.
10
EN
Laser
10 sec
Versus function active
Green LED
VER
flashing
VER
Height changed