3 Remove the tank located at the bottom of the dispenser and
fill it with natural mineral water or drinkable tap water. Put the
tank back in place making sure that the filter is immersed in the
water (see figure 2)(see figure 3)(see figure 4).
figure 2
figure 3
IMPORTANT
Always make sure that the water used is drinkable and of
good quality.
4 Lift the front cover, remove the powder containers, open the
lids, and fill them with the purpose-provided freeze-dried
granular products. Put the containers back in place with their
lids on, inserting the pin under the container into the purpose-
provided connection slot (see figure 5).
IMPORTANT
UAlways use food-grade soluble freeze-dried granular
products..
5 Turn on the dispenser at the master switch (see paragraph
11
figure 4
figure 5