English; Product Details; Product Features - Boynq Cubite Manual De Instrucciones

Cubite
TM

(English)

Congratulations with your new high-quality stereo PC-speaker with integrated 4-port USB hub, better
known as the "Cubite™" by boynq®.

Product details:

1) Volume button, push for turning the speakers On/Off and turn to adjust the volume
2) Speaker On/Off indicator, the ring will light up in orange when the speaker is On
3) Bass switch, turn to adjust the bass sound settings
4) Treble switch, turn to adjust the treble sound settings
5) 4-port USB 1.1 hub
6) USB indicators, these indicators light up to indicate the USB port is ready for use
7) Left integrated speaker
8) Right integrated speaker
9) USB plug, please plug into your computer USB port
10) Audio plug, please plug in into your Audio-out port
Installation:
The Cubite™ is very easy to install. Plug the audio and USB plug into the designated ports in your
computer and the Cubite™ PC speaker with integrated USB hub is ready for use.
Note: the Cubite™ speaker is completely powered by USB power, when the USB plug is not connected to your computer the
speakers will not work.
USB 1.1 HUB
4-Port USB hub, revision 1.1 and compatible with USB 2.0 connection.
When the Cubite™ is connected for the first time to the computer the USB hub is automatically detected
and ready for use. You can connect up to 4 different devices to your USB hub.
If any of the USB ports fails to connect, please remove all devices from the HUB and reconnect the
Cubite™ USB plug to the computer. It might be caused by too much electric current. The USB hub
should be functioning normal again.

Product Features:

Stereo PC speaker with integrated 4-port USB hub
•
• USB powered, no adapter required
• Plug & Play, no software required
• Speaker & USB hub are magnetically shielded
• Enhanced 3W RMS (4Ω), full range drivers for optimal clarity
• 4-port USB hub, revision 1.1 and compatible with 2.0
3