Main Features; En Wireless Zone And Pgm Output Expansion Module Ew2 - Eldes EW2 Manual De Instrucciones

EN
1 . GENERAL OPERATIONAL DESCRIPTION

MAIN FEATURES:

• 4 zone terminals.
• 2 open-collector outputs.
• 2 10kΩ NTC/PT1000 temperature sensor inputs.
• Battery or externally-powered.
• Compatible with any third-party wired sensor or siren.
EW2 is a wireless device intended to expand ELDES alarm system capabilities by providing
wireless connection access to any third-party wired devices. EW2 comes equipped with 4
zone terminals designed for wired digital sensor connection, such as magnetic door contact,
motion detector etc. In addition, the 2 open-collector outputs on board allow to connect any
wired siren as well as to connect and control any electrical appliance, such as gates, lights,
watering etc. EW2 also features 2 inputs for 10kΩ NTC/PT1000 analog temperature sensor
connection. The device can operate by powering it either using an external power supply or
3 x 1,5V AA type alkaline batteries on board. Once the external power supply is disconnected,
EW2 will automatically switch to battery power. In order to start using EW2, it has to be paired
with ELDES alarm system using ELDES Configuration Tool software or by sending a corre-
sponding SMS text message to ELDES alarm system.
It is possible to connect up to 8 EW2 devices to EPIR3 system, while to ESIM364 alarm system
- up to 16 EW2 devices at a time. The maximum wireless connection range is 150m (492.13ft)
(in open areas).
6 EN
WIRELESS ZONE AND PGM OUTPUT EXPANSION MODULE EW2