Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
d. Connecting the camera
1. Connect the cord of the 5V adaptor to the "Power supply" plug of the camera.
2. Plug the adaptor into a 230 V~ (the red indicator lights up).
e. Infrared lighting system
The infrared diodes do not produce light visible to the naked eye.
The infrared lighting system activates automatically in the darkness.
f. Pairing the camera
The camera must be "associated" to the monitor.
Refer to the chapter 6-c "Associate the camera to the monitor" of the kit manual.
5. MAINTENANCE
The warranty is void if the parts are dismantled. Clean the outside only with a soft and dry
cloth. Before cleaning, disconnect and switch off the video surveillance system.
CAUTION: Do not use any acid or alcohol based or other similar cleaning product or
solvent. You may damage the appliance and the vapours are explosive and dangerous for
your health.
Do not use any tool which can be voltage conductor (metallic brush, sharp tool...or other)
for cleaning.
If necessary, our technical website is at your disposal www.cfi-extel.com
6. SAFETY INSTRUCTIONS
The damages caused by the non-compliance to the manual lead to the expiration of the
warranty. We will not assume any responsibility for the resulting damage!
We will not assume any responsibility concerning any damage, to the goods or people,
caused by improper handling or by non compliance with the safety instructions.
This product has been manufactured in compliance with safety instructions. In order to keep
this status and ensuring the best operation of the product, the user must respect the safety
instructions and warnings contained in this manual.
The user of this system is responsible for checking whether the video surveillance is
compliant with the law in force in the country of use.
CAUTION
GB5
For any other safety instructions and FCC/CE warnings,
please refer to the user manual of the Extel video surveillance
kit.
CFI EXTEL WESVCM 82501 - 04/2012 - V1
Publicidad
Capítulos
Tabla de contenido
