AudioSonic CD-576 Manual De Instrucciones página 8

REPEAT A SINGLE TRACK
To repeat a preferred track in playback, press MODE button once, "REPT 1" shows in
the LCD. Then select the preferred track using SKIP/SERCH buttons or +10/ALBUM
button. The player will repeat the chosen track until you press STOP button.
REPEAT ALL TRACKS
To repeat all tracks, press MODE button twice in play mode, "REPT ALL" shows in the
LCD. The player will repeat all tracks until you press STOP button.
REPEAT AN ALBUM
To repeat a preferred album in playback, press MODE button thrice, "REPT DIR" shows
in the LCD. Then select the preferred album using +10/ALBUM button and SKIP/
SERCH buttons. The player will repeat the chosen album until you press STOP button.
RANDOM PLAY
Random play is that tracks on the disc are played by the player at random. Press
MODE button four times to enter this mode during play, "RANDOM" shows in the
LCD. Tracks on the disc will be selected at random for playback and the player stops
automatically after all tracks are played. You may press STOP button to exit random
play mode and press PLAY/PAUSE button to resume normal playback.
INTRODUCTION PLAY
Introduction play is that the first ten seconds of each track are played in a sequential
order. Press MODE button five times to enter this mode during play, "INTRO" shows
in the LCD. Press SKIP/SEARCH up button in Introduction mode to begin Introduction
play from the next track immediately after the current track. Press SKIP/SEARCH down
button in Introduction mode to begin Introduction play from the current track. Press
MODE button once more to exit introduction and return to normal playback from the
track the unit plays.
PROGRAMMED PLAY
• Programmed play is that tracks on the disc can be edited for playback in a
preferred order with the use of PROGRAM button.
8
Instruction Manual
• In MP3 stop mode, press PROGRAM button once, "PROG" shows in the LCD with
a flickering album number and the program sequence indication "P-01"; select
the album number to be programmed using SKIP/SEARCH buttons or +10/
ALBUM button, and press PROGRAM button again to store; the track number
flickers waiting for your selection. Choose the desired track with SKIP/SEARCH
buttons or +10 /ALBUM button. Press PROGRAM button again to confirm the first
programming and advance to the next programming step. The program sequence
indication changes to "P-02" waiting for your next input.
• Repeat the steps above to program more tracks. A maximum of 99 tracks can be
programmed in memory in a preferred order.
• Press PLAY/PAUSE button to begin programmed play in the preferred order
after you are done with programming. The player stops automatically after all
programmed tracks are played.
• You may press STOP button to terminate programmed playback. In program stop
mode, press STOP button again to clear the programming; press PLAY/PAUSE
button to begin the programmed playback with the programming order identical
with the previous one done.
EXTERNAL MEMORY MEDIA OPERATION (USB,MMC/SD)
• Prepare the player for external memory media operation
• Insert a USB data traveller into the USB port OR insert a MMC/SD card into the card
slot; slide the FUNCTION switch to the USB/CARD position and playback will start
from the first track.
NOTE:
The player reads data from the USB by default if both USB data traveller and MMC/
SD cards are inserted. You may press the USB/CARD button to switch between these
modes in stop mode.