Lenco MC-148 DAB+ Manual Del Usuario página 13

DAB+ OPERATION
Channel Frequency
Displays the frequency information for the current station.
Signal Error
Displays information regarding the error rate in the signal.
Bit Rate
This displays the type of broadcast you are receiving e .g . mono or
stereo and what bit rate is being used .
SECONDARY SERVICES
On some occasions you will see a ">>" symbol directly after the name
of the station. This indicates that there are secondary services
available to that station .
These secondary services contain extra services that relate to the
primary station, e .g . a sports station may want to add extra
commentaries. The secondary services are inserted directly after the
primary station .
1. To activate a secondary service press the FFWD
You will see that the >> has changed to a << to indicate you have
selected the secondary service .
2. Press the ENTER or PLAY/PAUSE button to begin playback of the
service .
3. To return to the original service, press the FRWD
ENTER or PLAY/PAUSE.
PRUNING
When the radio has performed a scan in several locations, you may
find there are stored stations that you can no longer receive.
This function automatically removes them from the stored station list.
1. Press the STOP/MENU button in DAB+ mode, and use either
on the unit,
PLAY/PAUSE button on the main unit or ENTER button on the
remote.
2. Use the
/
ENTER or PLAY/PAUSE to select .
on the remote to find <Prune>. Press the
/
buttons on the remote to select <Yes> and press
10
on the remote.
and then
/