henke sass wolf ECO – MATIC Manual De Instrucciones página 5

5) FILLING OF THE ECO – MATIC ®
a) remove protection cover of the needle
b) hold the ECO – MATIC
suck in of air into ther barrel
c) spueeze adjustable handle and then release quickly to draw fluid into the barrel
d) to remove air bubble inside the barrel, repeat step (c)
grip hollow
spike
viewing windows
INSTRUCTION AFTER USE OF THE ECO - MATIC ®
Remove all traces of material from syringe by flushing thoroughly with a hot water detergent mix
Rinse thoroughly with clean, warm water.
Disinfection
It is recommended that the ECO – MATIC
before and after each use.
1) Suck "hot" water into the barrel by using an attached bottle with warm water
2) Suspend the complete ECO – MATIC
water and boil for up to 20 minutes
3) Remove the ECO – MATIC
it dry
TO LUBRICATE:
If piston becomes sluggish: Remove piston and lubricate piston O-ring with olive oil or Vegetable Oil.
Do not use mineral oil, silicone, WD-40, glycerin or alcohol. Petroleum based products harden the o-rings,
reducing the life of the component.
®
at a slight incline and take care that the spike is below the liquid to avoid
®
and a supply of needles or nozzles be disinfected
®
including needles or nozzles in a container of
®
from container, wrap cloth around the handle and pump