Connection And Operation; Connection Diagram; Safety Precautions - König Electronic KN-HDMIREP25 Manual De Uso

1) HDMI input connection
2) Power LED
3) UTP output connection
4) Power connection 5V
5) Power connection 5V
6) UTP input connection
7) Power LED
8) HDMI output connection

Connection and operation:

• Connect the HDMI input source (such as HD-DVD, PS3, STB ) to the transmitter.
• Connect one piece of CAT-5e/6 cable to both of the output of the transmitter and input of the
receiver.
• Connect the output of receiver to display ( such as HD-LCD, HD-DLP)
• Plug one power supply into the transmitter and the other into the receiver.
Attention: insert / extract cable gently.

Connection diagram:

HDMI source
HDMI CABLE

Safety precautions:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
from mains and other equipment if a problem should occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
HDMI receiver unit
One RJ45
Up to 50m
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
4
HDMI CABLE