Publicidad
Idiomas disponibles
Idiomas disponibles
Parts List:
1 Bolt
2 Upper Clamp
3 Fitting adjustor
4 Lower Clamp
5 Fitting
6 Rubber Cap
7 Quick Release
8 QR nut
9 QR bracket
Steps:
1. Insert QR through QR bracket and rear hub, fasten QR nut.
2. Insert 2 Fitting Adjustors into lower clamp
3. Insert Fitting into Fitting Adjustor
4. Cover fittings end by Rubber Cap
5. Put Upper Clamp on Lower Clamp
6. Insert 2 bolts from above through two elliptical holes, Insert fitting and fitting clamps,
adjust the position tighten the nut, and mount fittings at the frame
Please note fittings could be adjusted by left & right, up & down or back & forth
After find the perfect position please screw fittings carefully.
ATTENTION: Continually check all bolts to be fastened tightly.
Note to the maximum load weight of 25 kg.
MANUAL FOR CARRIER
GB
Publicidad
