7 C
OMPATIBLE
Compatible Hi-Hat stands (HC14 & HHC)
8 T
D
ECHNICAL
HC14
Hi-Hat cymbal
(Included with drum set configurations)
Size
14"
Sensors
Bow (piezo ceramic element)
Edge & Choke (FSR Switch – MIDI ve-
locity from piezo signal)
Bell (FSR Switch – MIDI velocity from
piezo signal)
Choke
Yes
Trigger Output
Hi-Hat Control Output
Connections
Bell Trigger Output (optional for 3Way
triggering)
133 (H) x 355 (Ø) mm
Dimensions
5 ¼ (H) x 14 (Ø) inches
Weight
1280 g / 2 lbs 13 oz
Accessories
Owner´s manual (this document)
included
HC14-AC
Hi-Hat cymbal with accessories
Size
14"
Sensors
Bow (piezo ceramic element)
Edge & Choke (FSR Switch – MIDI ve-
locity from piezo signal)
Bell (FSR Switch – MIDI velocity from
piezo signal)
Choke
Yes
Trigger Output
Hi-Hat Control Output
Connections
Bell Trigger Output (optional for 3Way
triggering)
133 (H) x 355 (Ø) mm
Dimensions
5 ¼ (H) x 14 (Ø) inches
10
HC14 | HC14-AC | HC14-T - Owner´s Manual
S
TANDS
The following measurements describe the minimum requirements
for a Hi-Hat stand to fit the GEWA HHC Hi-Hat Controller. Note that
the HHC is not a DIY product. It is a spare part for the HC14 Hi-Hat
Cymbal and only works in conjunction with Clutch, Top Cymbal
and Bottom Cymbal included with HC14. To prevent the Controller
from spinning freely on the Hi-Hat seat, additional accessories might
be required.
A
Rod Diameter
Excess Rod Length
B
C
Excess Sleeve Height
Hi-Hat Sleeve Width
D
ATA
Measure in [mm]
7 mm
max
220 mm
min
25,4 mm
max
11,5 mm
max
Weight
1580 g / 3 lbs 8 oz
Hi-Hat clutch, 2 x 6,35 mm (1/4") TRS
Accessories
stereo cables (Controller & Cymbal),
included
owner´s manual (this document)
HC14-T
Hi-Hat top cymbal
Size
14"
Sensors
Bow (piezo ceramic element)
Edge & Choke (FSR Switch – MIDI ve-
locity from piezo signal)
Bell (FSR Switch – MIDI velocity from
piezo signal)
Choke
Yes
Trigger Output
Connections
Bell Trigger Output (optional for 3Way
triggering)
52 (H) x 355 (Ø) mm
Dimensions
2 (H) x 14 (Ø) inches
Weight
850 g / 1 lb 14 oz
Accessories
Owner´s manual (this document)
included
For reasons of product improvement, the specifica-
tions and/or appearance of this unit are subject to
change without prior notice. The present specifica-
tions describe the version of the product at the time
this document was issued. For the latest specifications
please refer to gewamusic.com.
Measure in Inch ["]
¼"
8 ¾"
1"
7/16"