EGO BHX1001 Manual Del Operador página 15

TO CONNECT BACKPACK LINK
TO EGO TOOLS
Commercial Tools:
1. Take LBX6000 for example,
align the
the plug with the corresponding
symbol on the tool. Insert the
plug into the power tool until
the green seal completely
disappears into the socket
(Fig.13).
Handheld Tools:
2. Insert the plug into the adaptor,
then insert the adaptor into the
EGO tool's battery receptacle
(Fig.14 &15).
3. Follow the instructions in the
tool's operator's manual to start
the tool.
4. After finishing work, remove the
plug from the professional tool
or remove the adaptor from the
tool and then pull the plug out
of the adaptor. Save the adaptor
safely. Just press the waist and
chest buckles to release them
and lower the backpack link (see
Fig.12).
56V LITHIUM-ION COMMERICIAL BACKPACK LINK — BHX1001/BHX1001-FC
symbol respect on
13
14
Plug
15
Green Sealing
Adaptor
15