Daga L Instrucciones De Uso página 17

TWO-KEY REGULATOR
Next, adjust the heat setting using one of the 4 possible levels, re-
peatedly pressing the temperature selection key . From now on, the
heating pad will operate normally in Free mode. In this mode, only
the red light on the control panel will be on, indicating the tempera-
ture selected, while all the others are off.
FOUR-KEY REGULATOR
Adjust the desired heat setting using one of the 4 possible levels
by pressing the temperature the keys and . From now on, the
heating pad will operate normally in Free mode. In this mode, only
the red light on the control panel will be on, indicating the selected
temperature.
4) In the 2 and 4-key controller models, you can choose an Autostop
time among those pre-set on the screen, pressing the key until you
reach the desired option (indicated with green light).
The operation times vary from 45 and 90 minutes depending on the
heating pad acquired. The green light indicates the selected time at
every moment when you press the key ). This lets you select the
automatic off time.
Once the preselected operation time has passed, the heating pad
will disconnect and all the temperature lights on the control panel
will turn off and the preselected operation time indicator light will
turn back on. Press any key to immediately return to the Free mode.
When no green light is on, the heating pad moves to the Free mode
and automatically turns itself off.
5) In the four-button regulators, you can activate the Comfort mode
at any time by pressing the key " " once.
From now on, the green Comfort light will be on, located on the right
side of the controller screen. This program controls the operation of
the heating pad. The heat setting and time will now be controlled di-
rectly by the controller. During the program (90 min), the heat (+/-)
and time setting keys remain blocked. To leave the Comfort mode at
any time and return to the Free mode, press the " " key once.
On the contrary, once the preselected operation time has passed,
the heating pad will disconnect and all the temperature lights on the
controller will turn off except the green Comfort program light. Press
any key to immediately return to the Free mode.
6) To turn off the heating pad, turn the side On/Off switch to the
"0" position.
To the start using your heating pad, we recommend that you put the
regulator at the maximum position (heat setting 4) for 20 minutes
for quick heating. Then, lower to desired temperature. It is advisable
that the maximum heat setting (level 4) be used only during the first
20 min of operation in order to quickly heat the heating pad; howev-
17
Manual Té r micas_N/L ESP/ING.indb 17 15/03/10 16:41