Accessories - Mesis Xpress Beauty XP4000 Manual De Usuario

Ocultar thumbs Ver también para Xpress Beauty XP4000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

English
• Connect the power-supply cable of the device to the electric socket.
• Switch on the device by moving the small button located on the side of the unit into position 1.
• Insert spouts in foot/leg sleeves, sbdominal/buttocks belt and armband.
Foot/leg sleeves
• Connect both cuffs to the connectors (the shortest one at
the foot area all the way to the longest one at the groin
area).
• Connect the connector to the unit.
• Put on the foot/leg sleeves and close the zipper; position
the foot/leg sleeves with the attachments turned toward
the inside.
• The inflation process should start at the foot area and gra-
dually reach the groin area.
Abdominal/buttocks belt
• If you are only using the abdominal belt, connect the single-connector attachments to the belt.
• If you are using the kit Slim Body (abdominal/buttocks belt) and the foot/leg sleeves at the same
time, connect the hoses of the triple connector to the applicators (abdomen / buttocks belt and
leggings);
• Connect the connector to the unit.
• Put on the abdominal belt over the buttocks/abdomen and strap it on using the elcro.
• The inflation should start from the top part and at the bottom part of the abdominal belt.

Accessories

Armband
• Connect the single-connector attachments to the armband.
• Connect the connector to the unit.
• Wear the armband and close the zipper.
• The inflation should start from the hand part and then go toward the
shoulder in sequence.
User manual: Xpress Beauty
Place foot/leg sleeves on the ta-
ble and insert the spout exerting
enough pressure until you hear a
„clack".
46
46
Index
Index

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xpress beauty xp6000Xpress beauty xp4000luxury

Tabla de contenido