Maintenance And Storage - Ribitech PROMKIT300 Manual De Instrucciones

- Do not put pressure on the shaft. Apply light force and guide tool. Increasing the pressure on
tool is not the answer to enhance the performance of the tool. Apply light pressure and guide the
accessory.
- Do not hold tool close to face and body.
- Small parts may fly apart as they come out with speed, wear appropriate protective equipment.
9. Once work is finished, stop product by placing switch on "0" position.
Note: do not put down tool until chuck has completely stopped rotating.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected form its
power source.
6.1- Maintenance
Clean plastic parts with a soft clean cloth.
Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
Do not put or immerse product in water or any other liquid.
Clean chuck and ventilation holes with a soft brush.
Do not attempt to clean the tool by inserting pointed objects through ventilation holes.
6.2- Storage
Product must be stored in a dry location. Always lock up product and keep out of reach of children