FITFIU FITNESS BESP-100 I Manual Usuario página 36

STEP 4. Insert the handlebar post (1) into the main frame tube (2) and secure it with the locking knob (3). Unscrew the 2
screws (4) under the mobile phone holder (7) and remove them from the handlebars (6). Place the handlebar (6) on the
post (1) and fix it with the 3 M8 screws (5). Then insert the mobile phone holder (7) into the handlebar (6) by pressing
down until it clicks into place. Then tighten the 2 screws (4). Place the table (9) on the handlebar (4) and fix it with the
knob and the fixing plate (8).
8
9
7
6
5
4
1
3
2
STEP 5. Place the display (1) on the handlebar. Connect the monitor sensor wires to the mainframe sensor wires (2)
and to the handlebar (3).
NOTE: Connect the cables as shown in the picture.
1
2
3
36