ENGLISH
Clean the soleplate with a soft cloth.
Fill the water tank with water and heat up the iron, and then iron over a piece of damp cloth for
several minutes for the purpose of removing any residue on the soleplate.
Note: Some parts of the steam iron have been slightly greased and as a result, the iron may
slightly smoke when switched on for the first time. After a short time, this will cease.
4. OPERATION
Water inlet cover
Open the water inlet cover and fill the water tank with water through the filling aperture.
Make sure the water does not exceed the MAX. mark on water tank.
Steam toggle button
The appliance can switch from MAX to ECO steam rates by pressing the steam toggle button.
The default setting is the MAX steam rate when the appliance is turned on. Press the steam
toggle button to select your desired steam rate, and the corresponding indicator of the
selected steam rate will light up.
Temperature dial
Turn the temperature dial to set the desired ironing temperature based on the garment to be
ironed. To activate the steam function, select the temperature range that steam is produced,
otherwise water spray will not be emitted efficiently.
Temperature indicator
When the iron is heating up, the temperature indicator will turn on. Once the iron has reached
the selected temperature, it will turn off. The temperature indicator will switch on and off as
the iron maintains the selected temperature during ironing.
Steam trigger
When the appliance is heated to the selected temperature, press the steam trigger for steam
to be sprayed from the soleplate continuously. Release the steam trigger to use the device for
dry ironing without steam.
Steam burst
Fig. 4.
Quickly press the steam trigger twice to produce a burst of steam, and the indicator of MAX
steam rate will blink. The Steam burst function can be only activated when the appliance is
operated under MAX steam rate and the indicator of MAX steam rate is turned steady on.
19
TOTAL IRON 7000 STEAMPRO / STEAMPRO TOTAL IRON 7200 TITAN / TOTAL IRON 7500 TURBOSLIM
05500_05503_05504_Total Iron 7000_7200_7500_Manual_YV01191106.indd 19
6/11/19 17:06