BEFORE YOU BEGIN
UNPACKING INSTRUCTIONS
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts
are present and have been received in good condition. Notify immediately your dealer and retain packing ma-
terial for inspection if any parts appear to be damaged from shipping or the carton itself shows signs of mishan-
dling. Keep the carton and all packing materials. In the event that a fixture must be returned for repair, it is
important that the fixture be returned in the original box and packing.
EXPLANATION OF SYMBOLS ON THE SILKSCREEN
The triangle containing a lightning symbol is used to indicate whenever your health is at risk (due to
electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the appliance.
DO NOT OPEN THE HOUSING
The unit complies with CE standards
Class II protection without earth connection
For indoor use only
Minimum distance between the appliance and other objects
0.5m
Don't stare into the light beam
SAFETY INSTRUCTIONS
•
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
•
Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also
receives this instruction booklet.
•
Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting
to is not higher than that stated on the bottom of the fixture.
•
This product is intended for indoor use only!
•
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent sur-
faces. Be sure that no ventilation slots are blocked.
•
The minimum distance luminaire from that part of the luminaire or lamp to the lighted object is 0.5m.
•
Maximum ambient temperature (Ta) is 104° F (40°C). Don't operate the fixture at higher temperatures.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit
by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance center. Always use the same type of spare parts.
•
Make sure the power cord is never crimped or damaged.
•
The light source is not replaceable. If it is faulty, the whole unit must be discarded.
•
Avoid direct eye exposure to the light source while it is on.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
INSTALLATION
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to
avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the
2
MANUAL - PAR-MINI-RGB3
CAUTION
SHOCK HAZARD
©Copyright LOTRONIC 2020