Bluetooth Operation - Brigmton BTW-80-CD Manual De Instrucciones

MO/ST BUTTON: In FM mode, press MO/ST button switch from stereo mode
to mono mode. Press again to switch back to stereo mode.
TONE ADJUSTMENT: Press TONE button on the remote control to select
bass and treble.When the display screen shows "TRB", use VOL+/- buttons
to adjust the effect of treble. When the display screen shows "BS", use
VOL+/- buttons to adjust the effect of bass.
SAVE BUTTON: In FM mode, press SAVE button to save the current
frequency to a preset position.
RANDOM: In CD or USB mode, press and hold the REPEAT button to select
the music into random playback mode.
DISCONNECT THE BLUETOOTH: In Bluetooth mode, press and hold the
PLAY/PAUSE button to disconnect the Bluetooth connection.

BLUETOOTH OPERATION

1. Press the MODE button to switch to the Bluetooth mode.
2. The previous paired device will connect to speaker tower automatically
when each time changing to Bluetooth mode.
3. Turn on the Bluetooth device (e.g. phone) and enter the Bluetooth
searchinterface.
4. Search unit name and pair it, input the password "0000" if necessary. If
paired, the display will blink steadily.
5. If it still doesn't work, reset the Bluetooth and follow above steps again.
NFC OPERATION
1. Press the MODE button to enter the Bluetooth mode.
2. Place the back of phone (with NFC function) on the position of word
"NFC" on the front panel of the unit for 3 seconds, the Bluetooth function
of the phone is activated automatically.
3. When the indicator lights steadily and you can hear an audible signal,
they are paired.
4. To disconnect NFC Bluetooth connection, place the back of the phone on
the position of the word "NFC" on the front panel of the unit. When there
comes an audible signal, they are disconnected.
5. Some devices of Android system 4.0 or below need to install the NFC.apk
to enable the NFC function. Some devices may be in a weak compatibility
for NFC function, that may relate to the NFC software.