Battery Capacity - Dörr DVL-165 Manual De Instrucciones

c) With ac power supply (optional)
Caution
Please remove batteries or Li-Ion battery before connecting the DVL LED Video Light with the AC power supply.
connecting the ac power supply
Insert the power supply plug into the socket for AC power supply (12). Connect the AC power supply with an
electrical outlet. Please disconnect power supply after use.
2. LED BattEry caPacity inDicator
The LED capacity indicator (13) shows the remaining power of the batteries or the Li-Ion battery.
When capacity indicator lights green, the remaining energy is sufficient.
If the capacity indicator flashes red, please replace the batteries or recharge the Li-Ion battery.
If you operate the DVL LED video light with AC power supply, the capacity indicator lights green constantly.
LED indicator
3 LEDs green
2 LEDs green
1 LED green (flashing)
Optionally available from DÖRR:
DÖrr ac power supply for Ultra Light DVL-165/DVL-192
Item-No.: 371029
Input: 100-240V 50/60Hz
Output: 12V, 2A

Battery capacity

100%
60%
20%
15