Weka Holzbau LC 4-25 Instrucciones De Montaje página 11

Anleitung LC4-25/SL 4-25
The selected colors are visualized by the
continuously illuminated LEDs. Colors are changed
according to the time (1 - 15 min.) set at the regulator
knob (no. 4).
08.09.2003 17:38 Uhr
Mixed color mode:
Turn the regulator knob (no. 4) to the symbol (all the
way to the left). The desired colors are selected as in
alternating color mode.
Note: If the regulator knob (no. 4) is turned to the
right in mixed color mode, the light controller
automatically switches to alternating color mode.
1. Switch on device (operating display illuminates)
2. Using the cursor button,
(LED flashes at steady intervals
3. Confirm using the set button
(LED flashes at short/long intervals
4. Select the next color using the cursor button and
confirm using the set button
(red LED flashes at short/long intervals
5. To skip a color, press the cursor button
green is skipped, yellow flashes at steady intervals.
Confirm using the set button (LED flashes at short/long
intervals
6. Press the cursor button; the colors blue, red and yellow are
selected (LEDs illuminate continuously)
Regulator knob to symbol
(blue, red, yellow)
Regulator knob to the right
(1 - 15 min.)
Seite 11
select the color „Blue"
)
)
)
= mixed color mode
= alternating color mode
GB
)
again;
11