General Information - Refco DCD-230 Manual De Instrucciones

English

1. General information

The DCD-230 core drilling machine referred to in these operating instructions
has been manufactured using state-of-the-art technology. All components are
subjected to rigorous quality assurance criteria during the manufacturing
process. Our management systems are certified in accordance with ISO
 These operating instructions contain important information about handling the
DCD-230. Safe operation of the device requires adherence to all safety
instructions and operating guidelines.
 The local accident prevention regulations applicable to the area in which the
DCD-230 is being used should also be adhered to, along with general safety
guidelines.
 The operating instructions are part of the product and must be stored in close
proximity to the DCD-230 where they should be readily accessible to
qualified personnel at all times.
 The qualified personnel must have carefully read and understood the
operating instructions prior to operating the device.
 The manufacturer shall not be liable for any damage whatsoever arising
through improper use, failure to comply with these operating instructions,
assignment of inadequately qualified personnel, or unauthorised modification
of the DCD-230.
 The General Terms and Conditions as set out in the sales documentation
shall apply.
 Subject to technical modifications.
Key to symbols
WARNING!
... indicates a potentially hazardous situation that could result in
serious injury or death if not avoided.
DANGER!
... indicates electrical hazard. Failure to comply with these safety
instructions may result in serious injury or death.
2
Instruction Manual DCD-230
9001.