Operating The Vitacore ® Control Panel - LUCTRA FLOOR Serie Manual De Instrucciones

EN
English
Operation
NOTICE!
Risk of property damage!
The lamp head is designed in such as way that the LEDs can be ideally cooled, thus
achieving a long service life.
Never cover the lamp head. This may cause a fire hazard.
You can adjust the settings on the VITACORE
your smartphone or tablet PC.
Operating the VITACORE
▶ see image 6
14. On-Off touch button
15. Touch buttons to adjust the light intensity
16. Boost touch button
17. Touch buttons to adjust the light colour
18. USB charging ports
Note:
The touch button symbols to adjust the light colour, light intensity and boost function
are only visible once you have briefly tapped the On-Off touch button (14).
The symbols fade again if you have not tapped the user interface for a few seconds.
The duration set for the lighting on the VITACORE
the VITACORE
– Tap the On-Off touch button to switch the light on or off.
– Tap the touch button to reduce the light intensity.
– Tap the touch button to increase the light intensity.
– Tap the touch button to make the light colour warmer (reddish).
– Tap the touch button to make the light colour colder (bluish).
– Tap the boost touch button to activate maximum light intensity of the cold white LEDs.
Note:
The boost function is terminated automatically after 30 minutes.
• The boost touch button symbol flashes when the function is activated.
– Terminate the boost function prematurely by tapping any touch button.
• If the boost function has terminated or the 30 minutes have expired, the VITACORE
trol uses the preset values.
USB charging ports
Smartphones and tablet PCs can be charged via two built-in USB charging ports (18).
NOTICE!
Risk of property damage!
Use only undamaged USB cables. This prevents damage to your devices and the
lamp.
Note:
The ports are only used to charge the connected devices. No data is transmitted.
– Connect the devices to be charged to the charging ports (18) using an appropriate USB
cable.
18 | LUCTRA
control panel
®
App. The preset duration for the lighting is 30 seconds.
®
control panel or through the VITACORE
®
control panel can be adjusted in
®
app on
®
con-
®