Description; Accessories - Hilti ST-SG5.5 Manual De Instrucciones

Symbols
Return waste Read the
material for operating
recycling. instructions
en
before use.

2. Description

2.1 Use of the product as directed
The ST-SG 5.5 / ST-SG 6.5 screw guide is an access-
ory attachment for use when driving long screws,
especially screws for sandwich panels. The screw
guide is suitable for use with the Hilti ST1800 and
ST2500 screwdrivers.
In the safety rules in these operating instructions, the
designations "attachment" or "appliance" refer to the
ST-SG5-5.
Modification of the power tool or tampering with its
parts is not permissible.
Observe the information printed in the operating in-
structions concerning operation, care and mainten-
ance.
To avoid the risk of injury, use only genuine Hilti tools
and accessories.

3. Accessories

S-NSD11 socket (bi-hex)
S-NSD10 socket
S-NSD 5/16" socket
S-NSD 3/8" socket
8
Printed: 07.07.2013 | Doc-Nr: PUB / 5070746 / 000 / 00
Location of identification data on the appliance
The type designation is printed on both sides and
the serial number is stamped on the base of the at-
tachment. Make a note of this data in your operating
instructions and always refer to it when making an
enquiry to your Hilti representative or service depart-
ment.
Type:
Generation: 01
Serial no.:
The power tool and its ancillary equipment may
present hazards when used incorrectly by untrained
personnel or when used not as directed.
The power tool is designed for professional use and
may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must
be informed of any special hazards that may be
encountered. The power tool and its ancillary equip-
ment may present hazards when used incorrectly by
untrained personnel or when used not as directed.
The working environment may be as follows: con-
struction site, workshop, renovation, conversion or
new construction.
Working on materials hazardous to the health (e.g.
asbestos) is not permissible.
2.2 Items supplied as standard
1 Power tool
1 S-NSD8 socket
1 Operating instructions
1 Cardboard box