Devices - Palmer GAMK2 Manual De Usuario

DEVICES

Click the DEVICES tab to open the window for viewing and editing device settings. The signal source, input
gain, output mode, and the network settings of the devices connected to the Grand Audition MK2 can be
changed here as required. Scroll up or down to view the desired buttons and input fields.
1
2
3
4
5
SOFTWARE
1
Display of the current software version.
INPUT
2
SOURCE: Selection of the signal source for the master device and setting of the input gain.
XLR: Balanced 3-pin XLR inputs L and R on the front and back of the device (INPUT L + R).
PLAYER: Audio player with USB type-A connection socket on the back of the device.
XLR GAIN: Setting the input gain for the XLR inputs to match the connected auxiliary device (mixer, CD
player, etc.). The values 0 dB or -6 dB are suitable for auxiliary devices with a high output level. A higher
input gain, such as +6 dB or +20 dB, should be used for auxiliary devices with a weak output level.
If the XLR inputs are activated as a signal source, the PLAYER tab is shown in gray and is not selectable.
14