Kikkaride VETTA Instrucciones De Uso página 8

I. PARTS
A. Frame B. Front fork C. Rear wheel D. Front wheel E. Pushbar (bottom) F-1. M6*30 screw F-2. M6 cap
nut F-3. 6mm shim F-4. Screw F-5. M6*45 screw G. Handlebar H. Back rest I-1. Rear basket I-2. Saddle
cover J. Pushbar (up) K. Canopy L. Middle foot rest M. Rear axle N-1. Fender N-2. 8MM screw O. Seat
P. Safe guard Q-1. Brake parts 1 Q-2. Brake parts 2 R. Front foot rest
II. ASSEMBLING
1.
(1) Insert the front fork (B) into the front wheel (D),then tighten them with M6X30 screw (F-1), M6 nut (F-2), 6MM
shim (F-3) (5N*M).
(2) Insert the fender (N) into the front fork (B).
2.
First, insert the brake parts 2 (Q-2) into the back side of the frame. Second, insert the brake parts 1 (Q-1) into the
rear wheel (C).Third, insert the rear axle into the rear wheel, then install them into the back side of the frame.
Last, tighten them up with nuts (5N*M).
3.
Take off the screw on the handlebar,then insert the handlebar into the frame (A). After make sure the handlebar
is in the right position,tighten them up with screw (3N*M).
4.
(1) Take off the plastic and screw on the middle foot rest (L),then insert the middle foot rest (L) into the bottom
of the frame,last fix it with plastic and screw (3N*M).
(2) Install the front foot rest (R) into the frame,then tighten them up with screw (F-4) (3N*M).
(3) Take off the buckle on the belt of the saddle cover (I-2), then, insert the belt through the seat (O), last insert
the buckle back.
(4) Install the seat (O) on the frame(A),then tighten them up with M6*45 screw (F-5) (5N*M).
5.
Insert the left side of the bottom pushbar (E) into the frame,then insert the back rest (H) into the left pushbar (E),
third insert the right side of the pushbar into the frame, last tighten them up with 8MM screw (N-2) (5N*M).
6.
(1) Loose the plastic wrench on the bottom pushbar (E), insert the up pushbar (J) into the bottom pushbar (E),
then tighten them up with the wrench.
(2) Loose the plastic wrench on the canopy (K), insert the canopy into the bottom pushbar (E), then tighten them
up with the wrench.
III. FUNCTIONS
(1) Foldable middle foot rest
(2) Brake
(3) Free wheel
(4) Adjustable backrest
(5) Adjustable canopy
(6) Push mode
(7) Balance tricycle mode
ENGLISH