Phonic PAA6 Manual Del Usuario página 36

3. Connect a source signal into the PAA6's line inputs.
4. Push the RUN/STOP button to start the level meter.
5. If the level meter clips, it may be necessary to adjust the measurement range. This is done by
simply clicking the range values on the level meter itself. The measurement range will depend on
the unit selected in the settings. Each unit type has three different ranges that can be selected.
When operating under dBu, the range can be adjusted between -85 to -20 dBu, -75 to -5 dBu, -60
to 10 dBu and -45 to 25 dBu. When dBV is selected as the unit, the range is selectable between
-87.2 to -22.2 dBV, -77.2 to -7.2 dBV, -62.2 to 7.8 dBV and -47.2 to 22.8 dBV. Under voltage, you
can select 43.6u to 77.4mV, 0.14m to 435 mV, 0.78 to 2.45V or 4.36m to 13.7V.
36
PAA6