Rear Wheels - tuctuc PLAIN Manual De Instrucciones

REAR WHEELS

To attach the front wheels, unfold stroller as described in the following section.
2) • Lean the stroller forward and press the rear wheel post into the rear frame hub
until it clicks into place (Fig. 2a). Repeat for the other side.
NOTE: Pull on the rear wheel to ensure that it is securely attached to the stroller.
(Fig. 2b). Pull up the release lever to remove the rear wheel (Fig. 2a).
release lever
Fig. 2a Fig. 2 b
CANOPY
4) • First recline the seat as shown in Step 6. To close the canopy, use the side flaps
with the hook and loop fasteners (A) and attach them to the sides of the stroller.
Use the hook and loop fasteners at the lower part of the canopy flap (B) to attach
them to the back rest of the seat (Fig. 4a).
• To open the canopy: push forward on the front edge of the canopy while holding
the rear of canopy in place (Fig. 4b).
• To fold the canopy: pull backwards on the front edge (Fig. 4b).
A
optional visor
B
Fig. 4a
48