General Maintenance - POLTI SANI SYSTEM BUSINESS Manual De Instrucciones

SANI SYSTEM BUSINESS - M0S12021 - W1DS - 1U05_FEV 1000-950.qxd 13/05/2020 11:22 Pagina 27
2. STEAM ADJUSTMENT
WARNING: Before sanitising, we recom-
mend that you direct the first jet of steam
onto a cloth or downwards for about 30 se-
conds without connecting the delivery bot-
tle. This will allow the working temperature
and the optimum pressure to be reached.
3. USE OF THE STEAM GUN
WARNING: For additional safety, test steam
delivery on a hidden part, leave the steamed
part to dry to ensure that no changes in co-
lour or deformations have occurred.
Straight flow concentrator,
Curved flow concentrator
WARNING: When using the concentrator
accessory, it is necessary to detach the Polti
HPMed disposable bottle and connect the
empty bottle supplied because there could
be a small loss of condensate from the di-
spenser where the bottle attaches.
4. OUT OF WATER
WARNING: Never fill the boiler as soon as the
safety cap is opened. The boiler is still hot,
even if the appliance is unplugged. On con-
tact with the hot, empty boiler, cold water will
evaporate producing a spray of steam which
could cause burns. Only fill the boiler when it
is cold and always keep your face away from
the boiler opening when filling.
Unplug from the mains electricity.
WARNING: If, during unscrewing, the cap
spins freely or if steam is escaping, immedia-
tely stop the operation, ensuring that the
boiler is switched off and the power cable is
unplugged from the mains. Wait for the ap-
pliance to cool (two hour) and unscrew the
cap before removal. TAKE CARE OF YOUR
FACE !!!

5. GENERAL MAINTENANCE

| 27 |