TROUBLESHOOTING
PROBLEM
Pump does not start
Bubbles on roller cover
Paint volume is slow
Roller end caps leak
Paint runs out of roller
too fast
Unit turns off and will
not restart
If problem cannot be solved follow WARRANTY instructions or call Customer Service at 800-264-5442 or 763-780-5115, Monday through Friday,
8:00 a.m. to 5:00 p.m. CST.
C820429A_MAN_Pro Electric.indd 10
Troubleshooting
PROBABLE CAUSE
SOLUTION
Electrical problem.
Check wall receptacle.
The variable speed dial is
Turn the dial to a higher setting and depress the handle button.
turned to 0 (OFF).
Air switch malfunction.
Problem with air hose. Contact HOME RIGHT
Paint container is empty.
Replace with new container of paint.
Paint may be too thick.
Thin paint, per paint manufacture guidelines.
The dial is turned to 0 (OFF).
Turn the dial to a higher setting and depress the handle button
Worn or damaged.
Replace with new end caps and seals. Contact HOME RIGHT.
Ensure there is not a gap between the roller cover and end cap.
Paint too thin.
Rollers are not appropriate for very thin paints like stains, use Paint Pad.
Variable Speed Dial is on
Adjust the dial to slow the paint flow.
too high of a setting.
Thermal Protector may have
Unplug and let unit sit for approximately 15 minutes.
shut unit off.
Protector prevents over heating.
PRO ELECTRIC PAINT ROLLER (C800804)
10
.
®
ENGLISH
5/12/10 1:37 PM