Master Slave Operation - Ibiza Light STROBE132LED Manual De Instrucciones

1 2
I N
O U T
Use the provided 3 pin XLR cable to connect the DMX output of the controller to the input of the first master, and
connect to the DMX input of second slave light from the DMX output of the first master light, analogously, till
connected all the slave lights, and insert the last connector to the output of the final light. (Notice: the core diameter
of every cable should be at least 0.5mm, double core shielded cable should be used).
A DMX signal terminator is recommended on the last unit of the chain. DMX terminator is a XLR connector with a
120Ω resistor between the pin 2 and pin 3 of the XLR connector
DMX512 [Address Settings]
This feature allows you to change the device address value.
Press the "MENU" key one or more times until ADDR is displayed, and then use "UP" or "DOMN" button to choose
the value of "A001 ---- A512".
Press ENTER to confirm the address.

MASTER SLAVE OPERATION

Press MENU button until SLND is displayed. Press ENTER. Choose NAST to set the unit as a master or press the
UP/DOWN buttons to select SL1/SL2/SL3/SL4 to set the unit as a slave. The slave devices will do the same effect
as master device.
Please note: In MASTER/SLAVE mode, only 1 unit can be set as a MASTER. All others must be set to SLAVE.
Please set the address and operation mode before you operate the unit.
STROBE EFFECT
Press MENU until SHND is displayed. Press ENTER and select a strobe effect via the UP/DWON buttons from SH0
– SH6.
MANUAL STROBE ADJUSTMENT
Press MENU until STOB is displayed. Press ENTER and adjust the strobe between 0-255.
DIMMER
Press MENU until DIMM is displayed. Press ENTER and adjust the dimmer between 0-255.
LED
Press MENU until LED is displayed. Select ON or OFF to switch the LED display on or off.
FHRS
Press MENU until FHRS is displayed. Press ENTER and the operation time of the unit is displayed.
1. Working channel table
DMX channel
1. DIMMER
2. FLASH SPEED
© Copyright LOTRONIC 2017
3
I N I N
O U T
DMX Value
1～255
1～255
O U T
Detailed functional
From dark to bright
From slow to fast
STROBE132LED Page 3