Orbegozo WF 0245 Manual De Instrucciones página 12

WF 0245
CONTROL PANEL
Switch on the appliance by pressing the ON/SPEED button (4) on the control panel. The fan starts to
•
blow at low speed. The speed indicator (3) lights up.
To change speed, press button (4) several times. Speed will change with each button stroke. The
•
respective indicator (3) will light up.
For oscillation, press the SWING button (2) and the fan starts oscillating. To stop oscillation, press
•
button (2) once again.
Your fan has a timer function. After having switched the unit on, press the TIMES button (B) and the
•
fan will operate for as long as you choose: Press the timer button several times and the setting will
change with every button stroke. The respective indicator lights (1) light up. When the set time has
elapsed, the fan switches off automatically. The fan can set the timer function from 0.5-4 hours. As
specified by the sum of the Time indicators that are lit.
The air flow can be adjusted by tilting the entire motor unit upward or downward. Loosen the Tilt
•
Adjustment knob and adjust the motor unit you have reached the desire vertical angle. Tighten the
screw again.
To switch the fan off, press the ON/OFF button (6).
•
Always unplug the appliance when it is not used.
•
Ensure batteries are inserted in the correct direction. Do not mix battery types. When replacing,
•
ensure both batteries are changed simultaneously. 2xAAA size batteries are required.
NO. NAME
A Mode button
B Timer button
C Off button
D Oscillation button
ON/Speed control
E
button
12