Functional Buttons; Select Button; Lcd Display; Measurement Operation - Egatronic 51268 Manual De Instrucciones

SELECT button

Selecting for DC and AC current measurement, Continuity Test and Diode Test. The
buzzer sounds when switching from one function to the other.Press this button to
activate the Meter when it is under Sleep Mode.
A. DC Voltage Measurement (see figure 3)
Warning!
The DC Voltage ranges are : 400.0mV, 4.000V, 40.00V, 400.0V and 500V
1. Insert the red test lead into the VΩmA terminal and the black test lead into the COM terminal.
2. Set the rotary switch to V
3. Connect the test leads across with the object being measured.
The measured value shows on the display.
20

FUNCTIONAL BUTTONS

LCD DISPLAY (see figure 2)
(figure 2)

MEASUREMENT OPERATION

To avoid harms to you or damages to the Meter
from electric shock, please do not attempt to
measure voltages higher than 500V although
readings may be obtained.
range.
(figure 3)