Instructions Of Use; Maintenance And Cleaning - Jata electro BT155 Instrucciones De Uso

• Don't allow children play with the appliance. Keep the
appliance out of the reach of children.
• Make sure neither the appliance nor the cable are in direct
contact with hot surfaces or objects.
• Always disconnect it from the mains when you do not use
it and before assembling / disassembling or when cleaning.
• Take care with the blade of the stick because it is very sharp.
• If the cable were to deteriorate it must be changed by an
Authorised Service Centre.

INSTRUCTIONS OF USE

• Remember that when you place or replace the stick, the blender must be disconnected of the
mains.
• To insert the stick (4) into the body (3) make coincide the indication (
the indication ( ) placed in the body. Next turn the stick to the (
leave it correctly fixed.
• To release the stick, turn it till the indication of the stick (
the body ( ) .
• Put the stick into the foods and press the power pushers having in mind that:
Pusher I: Minimum power.
Pusher II: Maximum power.
• You can regulate the power of the blender by turning the regulator (6) in one or another way.
Turn the regulator to the MIN position for a lower power. Turn it to the MAX direction for a higher
power.
ATTENTION
This regulator only works if the blender is the in minimum power (Pusher I). In the maximum power
(Pusher II) the regulator doesn't work.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• The stick may be cleaned with soap and water. Try to do it as soon as you finish using it, because
dry texture and the texture of some foods are difficult to take out, at also it can change the plastic
color of the appliance.
• You can take out the blade for cleaning. To do that hold the shaft of the blade by the upper side
and turn the blade anticlockwise. To assemble it again turn it clockwise. Be careful when you are
manipulating the blade.
) , coincide with the indication of
9
) placed in the stick with
) position till the end to