Package Contents; Electrical Connection; General Recommendations - Oxygen My Higgins RTW Advertencias E Instrucciones Originales

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14

Package contents

The My Higgins RTW device is used together with RTW
radio equipment to control and program the scenarios of your installations.
1 for Warnings and
1 for My Higgins RTW
1 for Power adapter
1 for Ethernet cable
original instructions
Warnings
Read these warnings carefully before installing and using your My Higgins RTW product. This information must be kept together with the product for
its entire lifespan. In addition to the instructions described in this guide, you should also comply with the detailed instructions given in the Installation
and Configuration paragraph available on the www.way-srl.com website. Using the My Higgins RTW device outside the application field outlined in
the instructions, is prohibited and failure to comply with these instructions will lead to WAY's exclusion of responsibility and will void the warranty.
Before installation, check My Higgins RTW compatibility with the equipment and accessories associated with it.

Electrical connection

Use the µUSB power adapter type B 5V
500mA (minimum 500mA) provided together with My Higgins RTW.
The adapter must be connected to an electrical system that is in good working order and which complies with regulations in force.
Make sure that frequency and supply voltage shown on the power adapter's rating plate match those of your electrical system. In order to avoid any
overheating risks, completely unroll the electric wire before connecting it to the socket. You must insert the power adapter lock to connect or
disconnect the power adapter; never pull on the cables. In order to avoid any risk of electrification, never touch the power adapter with wet hands.
The power adapter and the wire must be kept out of the reach of children and pets, while remaining accessible, to be able to disconnect them quickly
in case of emergency.
Frequency and maximum power used: 433.05 MHz - 434.79 MHz/erp < 10 mW

General recommendations

In order not to damage this product, do not drop it or bang it against other objects, do not expose it to inflammable materials or heat sources, humidity
or jets of liquids and do not immerse it. Do not place objects containing liquids on top of this device. Do not open it. Do not pierce. Do not attempt to
repair it. Do not install or use it outdoors. Do not use abrasive products or solvents to clean this product. You can clean its surface using a soft dry cloth.

Publicidad

Tabla de contenido
loading

Tabla de contenido