Steam Ironing; Ironing With Steam Spray; Setting The Steam Iron Temporarily Aside; Putting The Steam Iron Away After Use - Kompernaß KH 1281 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Important!
Should the care instructions for an article of clothing
not mention ironing, (Symbol
iron that clothing article. You could otherwise cause
damage to the clothing article.
• Check the care instructions on the labels of the
clothing article whether and at which temperatu-
re the clothing article may be ironed.
• Set the appropriate temperature setting with the
temperature control
The control light for the temperature
When the control light goes out, the chosen
temperature
w
has been reached.
• Wait until the temperature control light
out.
• To moisten the material, press the button for the
o
water fog
.
This function is suitable for very dry, crumpled or
creased materials.

Steam Ironing

• Set the steam control
strength setting.

Ironing with Steam Spray

The steam spray is especially suited to smoothing
places in the laundry that are difficult to access.
• Raise the steam iron a little way.
• Press the steam spray button to release the steam
spray
i
.
), you should not
a
.
w
lights up.
w
goes
u
to the desired steam
Setting the Steam Iron
Temporarily Aside
Fire Hazard!
Never leave the steam iron unattended when it is
hot or switched on.
• Set the temperature control
"MIN".
• Only put the steam iron down on its standing
e
foot
, fig. 2.
Putting the Steam Iron Away
After Use
• Remove the power plug from the power socket.
• Empty the water reservoir and clean the gliding
r
sole
.
• Place the cool steam iron horizontally on a soft,
clean base.

Drip-Stop Function

In conventional steam irons, it is possible that at too
low ironing temperature water begins to trickle from
r
the gilding sole
new technical feature, namely the DRIP-STOP func-
tion, to switch off steam. The iron automatically swit-
ches off the steam ejection at low temperatures. A
"CLICK" noise is heard when this happens.
Using the temperature rotary controller
required temperature.
Steam generation will continue as soon as this
temperature level is reached.
- 16 -
a
to the position
. However, this iron possesses a
a
, set the

Publicidad

Tabla de contenido
loading

Tabla de contenido