Safety Instructions - MSW BOH-1050-2 Manual De Instrucciones

SYMBOLE
Operation manual must be reviewed.
Never dispose of electrical equipment together with household waste.
This machine conforms to CE declarations.
Safety goggles must be used.
Ear protection must be used.
Safety mask must be used.
Protective footwear must be used.
II protection class machine with double insulation.
Attention! Wear protective gloves.
PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some de-
tails may differ from the actual machine.
The original operation manual is in German. Other language versions are translations from German.

SAFETY INSTRUCTIONS

1. Keep work area clean. Cluttered areas can cause injuries.
2. Consider the work area environment before starting to work. Don't expose power tools to rain or
wet soil. Don't use power tools in damp or wet locations. The work area should be well secured. Don't
use the tool in the presence of flammable liquids or gases. Power tools produce sparks during normal
operation or when switching ON/OFF. Never use power tools in dangerous sites containing lacquer,
paint, benzene, thinner, gasoline, gases, adhesive agents, and other materials which are combustible or
explosive.
3. Provide sufficient protection against electric shock. Prevent body contact with grounded surfaces. For
example: pipes, radiators, ranges, refrigerator enclosures.
4. Keep children and third parties away from work area.
5. Store unused tools. When not in use, tools should be stored in dry and high or locked-up place out of
reach of children.
6. Do not overload the machine! To ensure an optimum in the performance and safety of the machine,
only use it within the set parameters.
7. Use only suitable tools. Don't use small tools or attachments. Don't use tool for not intended purpo-
ses. For example: don't use circular saw for cutting tree limbs or logs.
8. Dress properly. Do not wear loose clothing or jewellery. They can get caught in moving parts. Rubber
gloves and non-skid footwear are recommended when working outdoors. Wear protective hair co-
vering to contain long hair.
9. Use safety glasses. Also use face or dust mask if the cutting operation is dusty.
10. Do not damage the connection cable. Never carry the tool by the cord or yank the cord to discon-
nect it from the power source. Keep cord from heat and oil sources and sharp edges.
11. Secure work area. It is recommended to use clamps or a vice for fixation. Please pay special attention
to your hands when operating the machine!
12. Do not overreach yourself. Keep proper footing and balance at all times.
13. Hold the machine firmly in both hands. When using the machine, hold it by the handles provided with
the machine.
Rev. 20.10.2016
13