Cartridge Replacement - Vitality little luxury Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Simplicity of use...
To replace the
Vitality
water cooler, simply follow these instructions:
1
1.Rinse filter under a running tap
gently shaking for 60 seconds.
4
4. Fit the filter cartridge into
the unit
Tips:
1.
Before use rinse filter under a running tap gently shaking for
60 seconds.
2.
To ensure your unit is kept clean, we recommend using the
Little Luxury Crystal Spring water cooler and water filter
cleanser every 3 months.
3.
To clean the bottle, use a few drops dishwashing liquid and
half fill the bottle with lukewarm water.
4.
If the flow of water stalls and stops flowing freely after the
filter is reinserted or replaced, remove the filter and shake
the filter to loosen the carbon and then reinsert the cartridge
into the cooler.
Note: DO NOT USE HOT WATER. Let the water drain and
rinse with fresh water once or twice then drain.
5.
When refilling the bottle with the water, it is suggested that
you should tap off 1 glass of water on the side of the unit.
6.
The filters cartridges can be placed in the plastic recycle bin.
IT IS RECOMMENDED THAT THE FILTER BE REPLACED ONCE A MONTH FOR CLEAN, HEALTHY, GREAT TASTING WATER.
Visit www.littleluxury.com to order online, or find a supplier near you.

Cartridge Replacement

filter cartridge for the
2
2. Fill bottle with cold tap
water
5
5. Turn bottle upside down into unit.
Wait
2
hour before using your
Little Luxury water cooler
®
Tip -
on first use flush filter under
running water for 30 - 60
Vitality
seconds to clear out loose carbon
3
3. Close the bottle screw cap
tightly
6
Clean every
3-6 months
6. Pull back clip and remove tap
reservoir cover inorder to clean
IMPORTANT
ENSURE THE BACK OF
THE UNIT IS 15CM
AWAY FROM THE WALL
CARTRIDGE
REPLACEMENT GUIDE:
EVERY 1- 3 MONTHS MAX
2-3 MONTHS
MORE THAN 3 PEOPLE
1-2 MONTHS
+
Filter -
Vitality
1-2 PEOPLE
=
=

Publicidad

Tabla de contenido
loading

Tabla de contenido