Choosing A Tv Channel; Selecting Tv Sound - Sunstech TLI1985HD Manual De Instrucciones

CHOOSING A TV CHANNEL

Use the CH+/CH-button on the front panel, or the CH+/CH-
remote control.
Press the CH+ button to increase channel number.
Press the CH- button to decrease channel number.
Using 0-9 digital buttons
You can select the channel number directly by pressing 0 to 9 buttons.
Example:
To select 1-digit channel (e.g. Channel 5):
● Press the 5 button.
To select 2-digit channel (e.g. Channel 20):
● Press the 2 button, follow by 0.

SELECTING TV SOUND

In ATV mode, according to the type of sound signal, use the NICAM button to select an
appropriate mode from the following: Mono, NICAM Stereo, NICAM DUAL I and NICAM DUAL II.
● When a mono program is received, you can only choose Mono.
● When a stereo program is received, you can switch between NICAM Stereo and Mono.
● When a bilingual program is received,you can switch among NICAM DUALI, NICAM
DUALII and Mono.
NICAM DUALI sends the primary broadcast language to loudspeakers.
NICAM DUALII sends the secondary broadcast language to the loudspeakers.
Note:
If the stereo signal is weak, it will be switched to Mono automatically.
BASIC OPERATION
11
button on the