PNI L1200W Manual De Usuario página 4

5.Do not taking with any electric conduction processing for example, watches,
bracelets or rings.
6.The inverter fixing and maintaining only for professional serviceman.
Inductive load and half-wave rectification load attention
Please choose inverters as 2to3times of load power when hitching half-wave
rectification or inductive load .
Static avoiding
Please wear the antistatic wrist strap and use the other side to connect ground
for protecting sensitive part of machine from person static before touching.
Do not take apart the machine under power ON
Do not install and take off power line when the electric is on. Please connect the
wires as counter mark shows.
Use only regulation battery
The product would be failure with non-regulation battery.
Operate the battery as instructed
Must install the battery as shown in the inverter installation instructions.
1.Do not connect the wires in short circuit. Must keep the connector tight. Do
not touching any both of connector of battery at the same time or wires exposed
sides.
2.Avoiding the electrolyte of battery overflow. The electrolyte would cause
metal corroding, machine fault and short circuit.
3.Keep battery away from the fire or any easy to cause spark machines
Caution! Fans!
Wait until fans are completely stopped. Do not use your fingers or other objects
to stop the fans.
Mount the device in well ventilated space
Make sure the air intake and exhaust are not blocked in any way. Also, do not
mount the top side of the passive cooling radiator too close to any wall or panel,
so the air flows freely.
User manual PNI L1200W
EN
3