Technical Data; Safety Precautions - König KN-SF200 Manual De Uso

Remote On/Off: Push this button to turn the built-in photo cell on or off. When on, the photo cell will
trigger the flash when any other flash fires.
Test: To fire the flash without taking a picture, push the flash button.
Modeling Light/Beeper
Middle Position: "—" Modeling Light & Beeper ON
Up Position: "O" Modeling Light & Beeper OFF
Down Position: "=" Modeling Light On & Beeper OFF
Mounting Knob: Mount the light onto a light stand.
We recommend testing the mono light in advance to determine the results that produce the effect
which you find most appealing.

Technical Data

Maximum Output Power
Maximum Guide Number
100% Recycling Time
Power Adjustment
Modeling Lamp
Colour Temperature
Triggering Methods
Triggering Voltage
Synch Distance
Voltage Range
Flash Tube
Weight
Caution
• Even unplugged, the unit maintains considerable internal voltage. There are no user serviceable
parts inside. Do not disassemble! Refer to an authorized service centre for any repairs.
• Do not exceed 75 Watts modeling lamp. The excess heat can damage the unit.
• Do not use a snoot with these units. The heat can damage the flash housing.
• Do not touch the bulb when it is hot!
• When not in use, disconnect from the power supply.
• Avoid sudden impacts as this can damage the flash tube and/or modeling lamp!

Safety precautions:

Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
200 Watt/Seconds
165 (ISO 100/ft)
3-5 seconds
1/8th to Full Power
Adjustable
On/Off Switch
Tracking
Daylight 5500 Kelvin
+/-100 Kelvin
Synch Cord
Test Button
Internal Photo Cell
5 V DC
Up to 36 ft
220-240 V AC 50/60 Hz
User Replaceable
1.5 lbs
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the
product to water or moisture.
3