Installation And Connection - Miele professional DOS K 60 Instrucciones De Montaje

For wall mounting the DOS module two
screws (4.8 x 32) and two plugs (8 mm)
are included with the unit.
Dimensions:

Installation and connection

^ Mount the module in a suitable loca-
tion on the wall.
^ Connect the dispenser pump and
electricity supply.
The connections for the mains cable
and dispenser hose are on the back of
the machine.
^ Adjust the position of the cover caps
along the siphon tube so that the
tube will reach the bottom of the con-
tainer.
^ Fill the storage container with the rel-
evant agent, feed the siphon tube
into the container and tighten the
cover cap securely.
DOS-Module venting and dispensing
instructions are given in the Operating
Instruction booklet for the machine.
7