LEXIBOOK DJ290SW Manual De Instrucciones página 22

TAKING PICTURES (capture mode)
Screen in capture mode:
White balance indicator
Capture mode
Memory card inserted
Battery level indicator
Full
Half
Low
Empty
1. Turn on your video camera.
2. Press the Mode key to switch to capture mode (the
3. Use the LCD screen to compose your shot.
4. Press the Shutter button to take the photograph.
Note:
• The number of pictures you have space for on your memory card (memory capacity) is
displayed on the screen and automatically decreases by one each time a picture is taken. The
words "Memory Full" will appear when there is no space left on your memory card.
• When there is insufficient light, press the Right / LED key to turn the compensating lamp on.
Press the key again to switch it off.
• Do not remove the memory card or batteries while the video camera is saving or the image
may be lost.
Using the self-timer and burst snapshot
The self-timer sets a delay from the time the Shutter button is pressed to the time the picture is
taken. The burst snapshot takes three pictures continuously.
1. To set the self-timer and burst functions, turn the camera on and set to capture mode using
the Mode key.
2. Use the Left key to select the self-timer mode: each time the key is pressed the icon in the
upper left corner changes.
22
Resolution indicator
Auto
Lumière du jour
Nuageux
Fluorescent
Tungstène
icon appears on the screen).
Memory capacity
1. Turn the
2. Press th
again to co
3. Press th
memory is
Note: The