Glatz AMBIENTE NOVA Manual De Instrucciones Y Opciones página 29

29
4.1
5.2
5.5
6.1
m
ed*
4.3 4.4
f a c i n
g
5x
f o r w
a r d s
5.1 5.4
5.3
5.6
6.2
5x
6.3
4
Pre-assemble optional
standpipe
1. Place standpipe on floor fasteing unit.
The side with the two thread holes
must face forwards (towards the
parasol).
2. Adjust holes / position
3. Place 5 washers in position
4. Pre-assemble standpipe with 5
hexagonal screws
!
The side with the two thread holes must
face forwards (towards the parasol).
5
Pre-assemble parasol
1. Push standpipe cover onto mast
2. Place parasol on standpipe
3. Attach parasol tightly to standpipe,
using 2 washers and 2 round-headed
screws
4. Put crank in place and remove strap
5. Open parasol with the crank
6. Make sure that the inner parts are
engaging
!
The parasol is very heavy. Work in a
threesome and hold the parasol securely.
6
Fixing the parasol in place
1. Make final adjustments of parasol
position
2. Fix parasol in place by tightening the
5 hexagonal screws
3. Push standpipe cover down as far as
it will go
4. Close parasol
5. Remove crank