First use
Checking the product and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed object, you may quickly damage
the product.
− For this reason, be very careful when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged. If this is the
case, do not use the product. Contact the manufacturer via the service
phone number indicated on the warranty card.
Basic cleaning
1. Remove the packaging material.
2. Clean all parts of the product before first use as described in the chapter
"Cleaning".
Inserting or replacing the batteries
1. Open the battery compartment cover
The battery compartment cover can be found on the backside of the electric
corkscrew
1
2. Insert 4 AA batteries
correct battery polarity (+ or –) (see Fig. B).
For battery replacement, remove the old batteries first.
3. Replace the battery compartment cover.
Using the electric corkscrew
1. Use the foil cutter
the cork. To do so, place the foil cutter around the neck of the bottle and
then rotate it while pressing it gently (see Fig. C).
2. Place the electric corkscrew
that it remains as upright as possible at all times.
.
9
into the battery compartment. Pay attention to the
to remove any foil from the bottle before removing
7
1
10
by sliding it upwards (see Fig. B).
on the top of the wine bottle, making sure
First use
13