Kompernaß KH1919 Instrucciones De Uso página 59

The appliance may not come into contact with moisture. Therefore, do not
use the lint remover on moist fabrics.
1. Lay the textile on a fl at surface, such as an ironing board. Ensure that
the surface to be processed has no wrinkles. Otherwise, the textile
could be damaged.
2. Turn the distance spacer 3 to the desired position or remove it com-
pletely (see Chapter "Removing/replacing the spacer"):
- "Thick" with large bobbles and coarse textiles (large spacing to the cutter
knives)
- "Thin" with small lint/bobbles and fi ne textiles (small spacing to the cutter
knives)
- Remove the spacer, only for very fi ne lint (virtually no spacing to the cutter
knives).
3. Using the On/Off switch/Speed switch 2, switch the lint remover to
the speed level I
LB5new.indb Abs1:58 LB5new.indb Abs1:58
- 58 -
25.02.2010 10:21:35 Uhr 25.02.2010 10:21:35 Uhr