Care And Maintenance - Collomix Xo 33 R duo Manual De Servicio Original

Care and maintenance

and especially when changing the mixing tool, always
Take the mixing tool out of the
Fett
Grease
your work.
Graisse
Grease the hexagon mount of the
Smar
coupling at regular intervals with
suitable grease.
that the machine can be properly cooled. Blocked ven-
chine.
Make sure that the ON/OFF switch moves and releases
smoothly
brushes. This means that the machine will shut itself
down once a certain level of wear is reached. The carbon
brushes can be replaced by the authorized customer ser-
vice center or by the Collomix Service center.
If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in order
to avoid a safety hazard
Have repairs carried out only by an approved workshop
or by your Collomix Service.
Only use original Collomix accessories and replacement
parts.
For exploded drawings, lists of replacement parts
and the form for repair orders, please refer to:
Disposal
The device, accessories and packaging should all be con-
signed for environment-friendly recycling.
vice lives must be made unusable by removing the mains
power cable.
For EU countries only:
Do not dispose of electrical tools with house-
hold waste.
concerned with used electrical and electronic equipment
ment must be collected separately and consigned for
environment-friendly recycling.
Warranty
The manufacturer provides a warranty within the frame-
dance with the requirements of statutory/country-spe-
the warranty, please provide us with your invoice or
delivery note.
On no account will any warranty claims be accepted if
The warranty does not apply to damages caused by nor-
mal wear, overloading, improper handling, unsuitable
accessories or inadequate maintenance.
chine which are made without our agreement shall ren-
-
and void.
Collomix GmbH
Daimlerstrasse 9
85080 Gaimersheim
Germany
-
-
-
EN
-
-