Pressalit Care 410 Instrucciones De Uso Y Mantenimiento página 4

4
5
2
3
3
6
4
Before using the product for the first time
• Check that the control box voltage (model with electric motor)
corresponds to that of the mains electricity supply.
• Remove transport protection.
• Pressalit Care supplies a range of shower chairs and the
installation guides can therefore be different. The information
in this guide is based on correct installation of the shower
chair.
Operation
Electrical:
• The shower chair can be height adjusted automatically using
the hand control. The hand control can be hung on the arm
rest, wall track or elsewhere for convenience. The hand control
is supplied with a wall bracket.
Manual:
• Keep lever lock behind back support/seat raised. Lift back rest/
seat until an audible click can be heard. Back rest/seat can
now be adjusted for height. Engage lever in ratchet to lock
position.
Adjustment
1
Electrical:
1: Press and hold the "Up" indicator, shower chair will rise.
2: Release indicator to stop.
3: Press and hold the "Down" indicator, shower chair will
4: Release indicator to stop.
2
Manual:
1: Lift lever lock behind back rest or seat at the same
1
2: Back rest/seat can now be adjusted for height.
3: Engage lever lock in ratchet to lock position.
For shower chair mounted on horizontal wall track:
1: Use screwdriver to loosen lock.
2: Move shower chair to desired position.
3: Retighten lock.
lower.
5
time as the back rest/seat until an audible click can be
heard.
4
6