Thesan Aircare ES Instrucciones De Montaje página 4

General safety provisions
and general informations
This document provides all the information neces-
sary to perform the installation of Aircare ES as far
as windows fitter is concerned.
Please observe these general safety provisions, in-
cluding the warnings, comments and instructions
contained in this operation and mainteinance manual.
Failure to follow the general safety provisions, war-
nings, comments and instructions can result in injury
and/or dama ge to persons and/or things, including the
product Aircare ES unit whose Thesan S.p.A. it will not
respond in any way.
Aircare ES can only be installed, connected and
maintained by experienced qualified electricians
or window installers having the proper skills as a
result of specific training or professional expertise
and who can guarantee that the works will be per-
formed correctly.
Aircare ES must be installed in compliance with
regu lations and standards regarding construction,
windows and doors, and electric systems currently
in force whe re the unit is to be installed.
Check components integrity before performing the
installation, if you have a doubt consult your dealer.
During the installation of Aircare ES should be
already prepared the corrugated plastic for the pas-
sage of electric cables. If there are already present
the electrical wire, disconnect the power supply du-
ring all installation operations.
Near Aircare ES should not be placed heat sources
with temperatures above 50°C.
Make sure that the air inlet is positioned so that it
will not take in smoke or other exhausts.
Do not to install Aircare ES near sources of oil or
fat (for example, griddles or grills for cooking food).
4
If Aircare ES serves a room containing equipment
fed by flammable substances, the installer must
make sure that there is an adequate turnover of air
for all equipment installed.
Check that the air inlet created by Aircare ES
does not affect appliances that burn flammable
substances.
Do not cover or insert any foreign objects into the
air inlets or outlets while the Aircare ES is running.
Do not use Aircare ES in such environments as la-
boratories/factories where hazardous gases such
as alkaline gases are used, or in places which may
present fumes of organic solvents, varnishes, or
other corrosive substances.
Never disconnect Aircare ES operation by pulling
on the electrical wires; always use the ON/OFF
button or the re mote control.
Never make any modifications to the Aircare ES.
Aircare ES must not be opened and dismantled
without suitable tools; Only qualified personnel —
who have acquired the necessary skills through
special training or professional activity — can
guarantee proper execution of the works and
only they can handle internal components of the
Aircare ES unit, including the fan.
Class I equipment.
The grounding must be ensured by connecting
the appropriate cable grounding.
Aircare ES must not operate without the filters, pe-
nalty invalidation of warranty claims.